Home: Two Types of Carpet Cleaning Methods Pros and Cons

Its easy to buy carpets at your trusted home depot, but you should know how hard it is to maintain it. Using several carpet cleaning methods to clean a home’s carpets is usually done by professional carpet cleaning companies. It has its own particular advantages and disadvantages for every cleaning method. The question is, how to choose between them? Before deciding which method you would like to be used to clean your carpet, review these two types of carpet cleanings’ advantages and disadvantages.

1. Wet cleaning

 

The carpet is first pre-conditioned using a chemical reagent that liquefies soils and oil-based substances which may be occurring in the carpet fibers and is also known as hot water extraction or steam cleaning. The water is heated to a temperature near its boiling point and pressurized. After which, this is injected into the carpet. The solution is extracted with a vacuum after about 10 to 15 minutes.

 

Advantages

  • Soiling is getting rid out from deep down in the carpet.

  • The use of high temperatures, pressures, and chemical concentrates is permitted.

  • For the reaction of cleaning, solvents are permitted extended dwell times.

  • Facilitated by agitation with grooming tool or extraction wand for the chemical reactivity.

  • Wet cleaning is a widely used method.

  • Highly recommended cleaning method by most carpet manufacturers and industry cleaning experts and professionals

Disadvantages

  • Somewhat long drying time. This can be lessened with the use of powerful equipment by competent technicians.

  • Usually required for maximum efficiency for the expensive equipment.

  • Almost high-cost factors.

2. Cleaning with an absorbent pad

 

Often known as bonnet cleaning, this carpet cleaning method is and is most often used for routine light maintenance. This can also be utilized for regular carpet cleaning. First on the process is vacuuming the carpet, and then using a hand pump or electric spray a chemical solution is sprayed onto it. For an appropriate dwell or reaction time, the solution is allowed to stay on the carpet.

 

The absorbent pad or bonnet is positioned on the drive block of a rotary floor machine and spun over the carpet surface at 100 to 300 rpm, which looks like a towel. Serves to impregnate the carpet fibers with the chemical solution for this action and afterward, picking it up with the soils.

 

Advantages

  • Outstanding results with lightly soiled carpets.

  • Fast, simple and inexpensive.

 

Disadvantages

  • Inadequate of reaching deeper down as it only cleans the top one-third of carpet fibers.

  • Dirt and chemicals are accumulating at the bottom of the carpet fibers which is left by the process.

 

Leave a Reply

Your email address will not be published. Required fields are marked *